The parts I used for this rocket, I had lying around. I already had an ACE 3.9 inch nose cone, a 3.9 inch LOC body tube and a PML coupler tube. I also had the 38mm motor mount tubes and I will use 3/16th birch plywood for centering rings and fins. Most other stuff I have like hardware is in my hardware cabinets. This project will utilize the anti-zipper design and have a single chute with no electronics. I will make the chute and shock corks from material that I also have lying around. This will be my first High Power Scratch built cluster rocket and I'm looking forward to building it.
